Screed Pump
OPERATING PROCEDURE
The material is loaded manually into the vessel.The material is mixed by a mixing shaft which is built into the vessel.After the material have been thoroughly mixed,the lid of the vessel is closed by an eccentric lever and further secured by the closing of the release valve. By opening main valve,pressurized air is introduced into the vessel via the vessel valve which the forces the material out from the vessel. simultaneously via the injection valve and air stream at the exit of the vessel creates in the conveying hose an air cushion which forces the material in a pressurized flow via the conveying hose to the place of work.
* Basic version without loading bucket.
* The mixing vessel is 12mm thick. To be connected to an air compressor of 2.800 i/m at 7 bar.
* Output from 2.5 to 4 m3/h.
* Three-phase electric motor of 7.5 hp
TECHNICAL FEATURES
Motor Power : 7.5hp
Voltage : 380-415V
Suggested Output Of Air Compressor At 7 Bar : 2.800 l/min
Vessel Capacity : 250 l
Output Per Cycle : 200-220 l
Cycles Per Hour : 12-15
Weight : 600kg
Size : 1650mm(L) x 1350mm(W) x 1400mm(H)
Recommended Model : 390 Air Compressor
* Basic version without loading bucket.
* The mixing vessel is 12mm thick. To be connected to an air compressor of 2.800 i/m at 7 bar.
* Output from 3 to 6.5 m3/h.
* Three-phase electric motor of 25-30 hp
TECHNICAL FEATURES
Motor Power : 30 hp
Voltage : 380-415V
Suggested Output Of Air Compressor At 7 Bar : 2.800-5.000 l/min
Vessel Capacity : 500 l
Output Per Cycle : 420-450 l
Cycles Per Hour : 12-15
Weight : 1150kg
Size : 2700mm(L) x 1350mm(W) x 1540mm(H)
Recommended Model : 390 Air Compressor